Trademarks: “ICC,” the International Code Council logo and “Accessible and Usable Buildings and Facilities (ICC/ANSI Al )” are trademarks of the. The edition of ANSI Standard A presented the first criteria for requirements and identify changes from the edition. . ICC/ANSI A Major changes/additions from ICC ANSI A – found in the edition of A 1. ICC ANSI. A – Section. ICC ANSI A –
|Published (Last):||14 April 2013|
|PDF File Size:||19.3 Mb|
|ePub File Size:||2.35 Mb|
|Price:||Free* [*Free Regsitration Required]|
The reopening device shall be activated by sensing an obstruction pass- ing through the opening at 5 inches mm nominal and 29 inches mm nominal above the floor. Telephones shall have push button controls where annsi for such equipment is available.
Speech shall be capable of being repeated and interrupted by the user.
Where existing building floor designa- tions differ from the arrangement required by Section Floors shall be designated This standard is not included in any packages. A clear floor space com- plying with Section shall be provided.
State Building Code – ICC/ANSI A Code Interpretations
Toilet compart- ments shall comply with Sections 2003 doors and doorways, and manual gates, including ticket gates, shall com- iccc with the requirements of Section Minimum maneuvering clearances at doors shall comply with Section Visual contrast shall be either light-on-dark or dark-on-light. Grab bars with a noncircular cross section shall have a cross section dimension of 2 inches 51 mm maximum, and a perimeter dimension of 4 inches mm minimum and 4.
The indication of an uppercase letter or letters shall only be used before the first word of sentences, proper nouns and names, individual letters of the alphabet, ini- tials, or acronyms.
The requirement for the frequency and range of anzi signals shall not apply in existing elevators. Accessible toilet and bathing rooms shall comply with Section The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. You may delete a document from your Alert Profile at any time. Side door clear opening width shall be 42 inches mm minimum. Sides of ramp landings having a vertical drop-off of V asni inch 13 mm maximum within 1 inches mm horizontally of the mini- mum landing znsi.
Subscription pricing is determined by: The centerline of the water closet shall be 12 inches mm minimum to 18 inches mm maximum from the side wall or parti- tion.
Table of Contents | ICC/ANSI A – | ICC premiumACCESS
Operable parts shall comply with Section Sliding hoistway and car doors shall comply with Sections Text descriptors shall comply with Sections A lavatory complying with Sec- tion shall be permitted at the end of the clear- ance opposite the shower compartment side where shower controls are positioned.
The height of the seat shall be 17 inches mm minimum and 19 inches mm maximum above the bathroom floor, measured to the top of the seat.
Buttons shall be arranged with numbers in ascending order. Search the history of over billion ixc pages on the Internet. An entry 36 inches 91 5 mm minimum in width shall be provided at one end of the inch mm width of the compartment. Please visit the ICC website at www. Existing elevator car configura- tions that provide a clear floor area of 16 square feet 1.
These scoping provisions 2003 address the application of this standard to: Swing-up grab bars shall be 28 inches 71 mm minimum in length, measured from the wall to the end of the horizontal portion of the grab bar.
Allowable stresses shall not be exceeded for materials used where a vertical or horizontal force of pounds 1 1 12 N 61 Chapter 6. Accessible units shall comply with Section The rear wall grab bar shall be 36 inches mm minimum in length, and extend from the centerline of the water closet 1 2 inches mm minimum on the side closest to the wall, and 24 inches mm minimum on the transfer side.
The edition largely 203 that goal. Your Alert Profile lists the documents that will be monitored. Truncated domes shall have a center-to-center spacing of qnsi. Elevator doors shall be horizontal sliding type. Where detectable warnings are provided on curb ramps, they shall comply with Sections Handrails shall be permitted to protrude 4 V 2 inches mm maximum.
2003 ICC Accessible and Usable Buildings and Facilities
The spout shall provide a flow of water 4 inches mm minimum a171 height. In Type A units, a shower seat is not required to be installed where reinforce- ment complying with Section TTYs required at a public pay telephone shall be permanently affixed within, or adjacent to, the telephone enclosure. Walking surfaces that are a part of an accessible route shall comply with Section The function button shall be located immediately below the keypad arrangement or floor buttons.
The audible signal 20033 be activated by pressing a function button.